diy

You are currently browsing articles tagged diy.

On one of my recent trips to Etsy Labs last month I learned how to make a reversible tote bag as instructed by Kim from Tinyhearts Designs. The bag was so easy to make and after I finished it it very quickly became my main purse. It’s lightweight, versatile and perfect for summer! This tutorial is based on the pattern Kim showed us. I hope you enjoy making one of your own. :)

The above pattern is not to size, but I’d recommend printing it and using it for reference as you follow along.

First you’ll need to recreate the pattern pieces to scale on paper. I used a brown paper similar to a paper grocery bag.  This image will help you  draft the dimensions and show you how to add the darts (the cuts on the tote piece). A compass or flower pot can also help you make the curves at the bottom of  each piece. Once you’ve drawn your lines, cut your squares, fold them in half vertically and cut along the green line so that each piece is symmetrical. The strap is pretty straight forward; cut it according to the dimensions above (4″ x 28″).

This is what your pattern pieces should look like. Now it’s time to focus on fabric.

Since the bag is reversible choose a patterned and a solid fabric to contrast the inside and outside of the bag. I picked a floral fabric with a bird as a focal point and for my solid a blue fabric with some diamond shapes. This is as close as I got to a solid fabric, but it’ll still work. ;)

Begin cutting your fabric by folding the fabric with the right sides facing each other. Folding it this way will let you mark the wrong side of the fabric and give you two finished pieces. Pin your “tote” pattern piece to the layered fabric and trace with a pen or pencil. Do this for your pattern and solid fabric. For the “pocket” and “strap” there is no need to fold the fabric over since you’ll only need one of each. Cut 1 pattern and 1 solid pocket, then cut 1 solid strap.

You should end up with7 pieces altogether. If you’re like me and you got your fabric from your stash the pieces will need some ironing. Iron all 7 pieces with wrong side up.

Once you’ve ironed all your pieces, focus on the pockets. With wrong side up, fold the right side about 3/8″ and press as you move down towards the bottom of the pocket, curving the bottom with the help of the small darts at the bottom, and around to the left side of the pocket. If you need to plead the fabric a little this is fine too as long as you get a somewhat smooth curved edge. Once you’ve pressed both sides and bottom, fold the top about 5/8″ and press.

Now focus on the strap. With wrong side up, fold about 3/8″ from the top and press. Do the same for the bottom. Then fold the piece in half horizontally (top to bottom), placing the top fold against the bottom fold. Press all along the strap with right side facing up.

We’re now ready to sew! Let’s begin with the easiest part: the strap. Sew all along each side at about 1/8″ from the edge. Strap is done.

Now let’s work on the 4 tote pieces. Sew each dart about 1/4″ from edge with wrong side facing each other. To sturdy your bag add some zigzag as well.

Now focus on the pocket. I’ve use pins to help guide me during sewing. With right side up, sew the top edge of the pocket about 1/2″ from the edge. DO NOT SEW SIDES or BOTTOM YET! Grab a contrasting tote piece and align pocket in the middle with pins (both pieces right side up).

You’re now ready to sew the sides and bottom of the pocket. To firmly secure the pocket to the tote, place the presser foot and needle about 1/4″ below the top edge and bring the needle into the fabric using the handwheel. Begin sewing using the reverse sewing lever until the needle is just above the top edge of the pocket. From there sew normally at about 1/8″ from the edge and all around the pocket. When you’re at the top left edge sew a few stitches downward to fasten this side. Follow the same steps for the second pocket. Note on my 3rd photo here that I made a boo boo and actually sewed my tote pieces first before attaching the pocket (that’s why there’s no raw edging, but there should be).

We’re almost there! Sew your tote pieces (pattern pieces together and solid pieces together) with right sides facing each other at about 3/8″ from the edge. Add zigzag to both pieces.

Turn your patterned (floral) piece right side out and insert the wrong side out solid into your tote. Align the tops of the inside and outside of the tote with your hand by pressing and pulling them together. Once you have them close by fold them in towards each other about 5/8″ from the top. You may have to fold the inside in more than the outside to get them to align. Secure your folds using pins. When you get to each side seam insert each end of the strap at about 1″ between the two folds and pin.

This is the final step! Sew all around the tote at 1/8″ and at 1/2″ from the edge. This double seam will help secure your strap and give your tote a finished look.

Voila, you’ve got yourself a handmade reversible tote bag! I hope you found this tutorial useful and easy to follow. If there is something I can clarify or elaborate on please let me know. Btw, I only used one pocket for this bag since I didn’t want to cover the pretty print on the outside.

Now I’m wondering…is this something you’d like to see in the shop? It’s very different from sock monkeys, but it still involves sewing, which I love. Next week I’ll introduce you to a new custom Mars Sock Monkey. :)

Tags: , , , , , , , , , , , , , , , , , , , , ,

Lately I’ve been taking my knitting from my desk to the couch where it’s warmer. Doing this made me think of all the different tools I take with me so I thought it’d be fun to do a post on them. When I knit a Mar Sock Monkey Hoodie these are the five essential tools I need (left to right): Knitting needles, crochet hook, tapestry needle, stitch holder and thread cutters.

Knitting needles: One of my favorite tools are my Addi Turbo circular needles. I love them. I use size US 3 needles, which allow me to do some of the color work on the front of the sweaters. I also like that they’re circular because they don’t fall and there’s no hassle switching between them. My needles were bent, but they still get the job done! :)

Crochet hook: I saw a lot of these while growing up since my Mom is an avid crocheter. She uses some pretty small sizes for her work! As for me, I use a Clover aluminum crochet hook size C. It’s perfect for picking up stitches, adding finishing to the edge of knitted fabric and tidying those loose yarn ends. Also nice for making winter hats. The crochet hook has become such a useful tool for me.

Tapestry needle: Once all my pieces are complete I use a tapestry needle to sew the seams together. It has a curved tip which is nice for sewing knit fabric; the tip peaks out from the puffy stitches. The large eyelet works great on double knit (DK) worsted yarns. I own a set of Clover Chibi jumbo darning needles. They’re nice and big and come in a little capsule so I don’t loose them easily. ;)

Stitch holder: I used to use stitch holders to put my projects on hold, but these days I get some proper use out of them. They work like extra needles which secure knit stitches in place. I use one to hold stitches at the top the hood. While one half of the stitches are on hold I knit the other half of the hood using my circular needles. After both ends are done I connect them at the top using the  kitchener stitch. I have a set of 6″ and 7″ extra large Clover aluminum stitch holders.

Thread cutters: I fell in love with these cutters as soon as I got them. They’re cute and they’re the tool I use the most besides my knitting needles. They work great on thread and even thick yarns. I use them when I sew on the sewing machine because they’re not bulky like big scissors and they’re quick to grab. I bought these from an old Edmund Scientifics catalog but I recently ordered one and they’re nowhere to be found. :( I’d like another cute pair like these…I also have a pair of  these. :)

Yarn: I wasn’t going to forget about yarn itself. It keeps my sock monkeys nice and warm. I’m still learning about weights and types because there’s lots to know about yarn. I use double knits. They’re somewhere in between baby yarns and yarns for adult clothing. I also like to use cotton mixes and I prefer strong bright colors! I keep my yarns in a large clear plastic bag so I can see them when choosing color.

I hope you enjoyed my knitting tools write up! If you’re a beginner or advanced knitter, I’d highly recommend the tools above. Knitting is like many trades when it comes to using the right high quality tools. I’ve bought some cheap stuff and it doesn’t work as well as the higher-end stuff. :)

Thanks to Toby for taking some of these photos!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Meet little Ali-Star! He wears the very first baby star sweater and a new bucket hat I made from my stash of vintage fabric samples. I think I’ll use some of that fabric to make more sock monkey accessories! When it came time to sew Alistair’s bucket hat I found that the instructions I used were removed from the Simplicity web site -although it looks like they’re back up! Good thing it’s not a complicated pattern otherwise I would have had some trouble. :)

Tags: , , , , , , , , , , , ,

On my sixth week of being a Twitter and I’ve gained 390 @maribelmade followers.  Yay!

I’ve made a lot of new friends in the past five weeks and I thank all these new friends for the yummy content they feed me on a regular basis. In turn, I present some of the most interesting content be it handcrafted, artisan made, finely instructed or uniquely designed works in a weekly blog post I call Maribel Made Twit Finds.  I hope you enjoy the goodies. :)

This week’s Twit Finds:

  1. Corsages and boutonnieres by Laurie Cinotto of La La Laurie - These are so pretty! (via @crowandcanary)
  2. Extra Wide Cool and Warm Neck Cowl by Emma Charles Photo Plus on Etsy - For your puppy! This little guy looks adorable. Makes me want a puppy even more if it can wear these fashions. (via @Etsy)
  3. Steampunk Ring by Catherinette Rings on Etsy - Stunning piece of jewelery. (via @SteampunkRings)
  4. How to Make an Apple-Print Tote Bag by Kayte Terry of CraftStylish - This looks like so much fun. I like the idea of stamping with organic or found objects. Makes things even more interesting. :) (via @CraftStylish)
  5. “Junior Space Commander” Letterpress Print by Candykiller - Slightly bizarre and imaginative characters by artist Brian Taylor. Very very nice works! (via @tommmykane)
  6. Hibiscus Wrist Purse by Kathleen Dustin - Exquisite evening bags become wearable art. Magnificent! (via @papercrave)

See you again next week!

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Yesterday I made an inventory of the socks I have available for making sock monkeys. Doing this made me think of all the things I do to make a Mars Sock Monkey. Here’s a short list of the steps I take to create a sock monkey with a knitted hoodie:

Steps to making a sock monkey

  1. Sock selection
  2. Sock cutting and sewing
  3. Stuffing of body beginning with legs, then armstail and ears
  4. Attachment of safety eyes
  5. Sewing opening where eye fasteners went in
  6. Hand sewing of mouth, ears, arms and tail to body

Steps to making a knitted hoodie

  1. Graphic design
  2. Yarn color selection
  3. Knit pattern creation
  4. Knitting of body front
  5. Knitting of body back
  6. Knitting of sleeves
  7. Sewing body front, body back and sleeves together (4 pieces)
  8. Picking up stitches from right side sweater neck and knitting right side hood piece
  9. Picking up stitches from left side sweater neck and knitting left side hood piece
  10. Sewing back sides of hood pieces together using Mattress Stitch
  11. Sewing tops of hood pieces using Kitchener Stitch

Ta-da, you have a sock monkey with a hooded sweater! This process takes me about 4-6 days but the results are so worth it. I’m planning to do a tutorial on how to make one so stay tuned for that! :D

Tags: , , , , , , , , , , , ,


Retro Tie-Back Apron pattern, originally uploaded by maribelmade.

In my search for a cute and free apron pattern I came across this one at Quamut.com. I liked it as soon as I saw it! The bad thing is the template is very small, although the instructions recommend enlarging with a copier. Since I didn”t have one handy I drew it out on an A2 sketch pad (good pattern paper?). For guiding purposes, I placed the first drawing of the Bottom Front underneath the second and third sheets which include the Neck Strap, Pocket and Top Front & Tie. It was successful in all plus the apron is cute enough to go through the trouble. :)

The pattern above comes from the book, A Is for Apron: 25 Fresh & Flirty Designs, © 2008 Lark Books.

These are other cute apron patterns I found online:

Classic Reversible Apron (pdf) from Stardust Shoes
Scalloped Apron (pdf) by Susan Branch
Mum’s Cooking Apron by Marieke on Cut Out + Keep
Aprons from Tablecloth Tutorial by Mommy Blessings
Heart & Shamrock Aprons (pdf) by Jo-Ann

A tool belt one:
Tool belt apron tutorial by Heart of Light

Some for sale:
Stella Apron by Grand Revival
Emmeline Apron Sewing Pattern by Sew Liberated
Sweetheart and Dorothy Aprons by Caroline’s Kitchen Online

Tags: , , , , , ,

Some time ago when I read my rss feeds, I looked into making a spiffy light box in which I could take photos of things I would one day sell online. I didn’t know what I would sell then, but I did know I wanted to take professionally looking product photos. Apparently it’s one of the simplest things in the world. Some of the ideas I saw then helped me come up with this little hack of a lightbox. It’s specifically made for small items, like the Knit Rings I made before the holiday!

It’s really quite simple. I took a shoe box, carved a round hole on one side and stuck an Ikea light socket cord from a lamp I broke before it even made it home (ikea might sell these sockets thingies separately). I also thought it would be neat to take photos from the top so I carved a window on the top for these birds eye view shots. As a finishing touch, I stuck a folded piece of paper for a smooth backdrop. I used white and black drawing paper in this case to avoid transparency.

These photos were taken with a basic Canon PowerShot A570 point and shoot camera. Here are some before and after photoshops:

The ones taken from the top required less beautification in Photoshop since the light bulb was almost directly on top. Neat! And that’s that. :)

Tags: , , , , , , , , , , , , ,

Just like I had my fill of Mexican food during my vacation, I also had my fill of shopping! On one of those days I ventured into a mall down in El Paso and came across a Build-A-Bear Workshop. The idea of the shop is to be able to create your very own custom stuffed animal. Sounds great doesn’t it? Well it certainly looked like it and demand seemed high too. There were adults and kids roaming around checking out all the different stages of bear creation. Even the lifeless sacks of faux furs looked enticing and for me the main attraction were the accessories (for the monkeys of course)! :)

Prizing was relatively cheap to begin, but after stuffing, voice boxes, clothing, accessories and what not I could see how the price could easily sky rocket. Maybe there is more people than I thought looking to get a custom toy. I didn’t bring a bear back with me, but I did get a tiny pink messenger bag, a backpack and a stuffed acoustic guitar. Super cute ^_^

Stuffing bears!

Tags: , , , , , , , , , , , ,

It’s a recent development that I now make sock monkey sweaters for reasons beyond learning the basic construction of the knitted sweater. Now that I know more of the fundamentals, I can move on to the finer details of a knitted garment!

A recent client asked me to make a custom monkey wearing a hooded sweater with a dinosaur! The most I had ever done before were stars and hearts, which are much simpler designs, but this called for something more intricate and asymmetrical so I had to do more planning and designing. This is the process I went through to create the “Dino” sweater.

I began by creating a drawing of the dinosaur in Illustrator. I had to think about how it would look since the toy would be for a 2 year old baby so I didn’t want it to look too scary. I was thinking of something simple, fun and with a cute look. The baby was also a boy so I worked with colors like blue, yellow, green and red. Nothing girly here! Kawai, yes! :)

Then, using the original drawing as a guide, I placed it on top of a grid as a transparency and added Xs to the boxes which showed any piece of the dinosaur (using layers, also in Illustrator). If you’re familiar with pixel art, then this is exactly what I did. I created a “pixel” by pixel dinosaur on a grid! Of course, the image above is round and fine and the grid is square and jagged so for some of these pixels (or Xs) I had to consider whether that X really belonged there or not. It was really more of a personal call. I later converted the required Xs into colored ones to tell where I would switch from one yarn of color to another (see fair isle knitting).

“Dino” knitting pattern

Now the knitting part begins! This is where it gets tricky. Every box within the grid indicates a knit stitch. Remember that the piece is done in stockinette stitch so all stitches on every row will face in the same direction, unlike garter stitch where every other row alternates. The white and grey rows represent the right and reverse sides of the fabric. The boxes with the Xs show where the dinosaur will appear. The black Xs show the outline of the dinosaur I included in the design and the colored ones represent the actual dinosaur and the color of yarn I’ll be knitting with in that particular stitch.

Symmetrical designs are much easier to make. Something asymmetrical like this requires more attention to which side of the fabric you’re facing because if you’re facing the right side you’d start knitting the row as the pattern calls from the right, but if you’re facing the back or reverse you’d begin from the left. This is something that took me a while to comprehend, but once I understood it, it made a whole lot of sense! Keeping track of color changes, paying attention to where you are in the row and knowing which side of the fabric you’re facing are probably the most important things to know when knitting a colored, asymmetrical design. Just understanding some of the basics makes the rest so much easier. ;)

Final “Dino” sweater front piece

Jed’s short sleeve “Dino” hooded sweater front and back

Tags: , , , , , , , , , , , , , , , , , , , , ,

« Older entries